| |
Vehicle Details
| Model |
Accord |
| Model Year |
1996-2002 |
| Engine Types |
4 cylinder |
ECU upgrades are available for this vehicle, however, an ECU swap is
required and an OBDI ECU must be used. Harness wiring may need to
be changed as below.
Notes
- Manual transmission only.
- The stock ECU cannot be used, and must be replaced with another
OBDI ECU (see below)
- 2000-2002 Accords with 3 wire idle valves will need to replace or re-wire
the idle valve.
- 2000-2002 Accords will no longer have a functional temp gauge.
- Using a Hondata system on a 2000-2002 Accord as done at the
user's discretion is not supported by Hondata.
OBDII ECU Connector Types
Please note there are two types of OBDII ECU connectors (1996 and
onwards vehicles) The correct type must be specified when ordering.
Both type use 3 connectors (for manual transmissions).
OBDII A
OBDII B
 |
