|
Change History
V2.0.0 (31 Jan 2012)
V1.6.0 (1 November 2011)
| • | Improved datalogging/recording performance when display window is maximized. |
| • | Fixed tabs in the settings window. |
| • | Added automatic conversions to sensor display minimum and maximums, and also sensor warning minimums and maximums. |
| • | Added functionality to saving window position for multiple monitors. |
| • | Included security check to prevent saving data to Program Files to avoid virtualization problems with Windows. |
| • | Added Import/Export feature to the Sensor Settings form, the Graph Template form, and main Settings form. |
| • | Fixed bug where exception is thrown when sensor display min and max are the same value. |
| • | Added speed correction to the Parameters form under Misc. |
| • | Added a driver check entry to the status bar, a balloon hint to install the driver, and an entry in the general settings window to disable the balloon hint. |
| • | Added 2D graphs to the small tables in the Parameters form. |
| • | Fixed problem where lean protection activates when using launch control. |
| • | Added a form to change and create shortcuts. |
V1.5.4 (13 June 2011)
V1.5.3 (11 May 2011)
| • | Added datalog trim functions. |
V1.5.0 (17 January 2011)
| • | When multiple copies of SManager are run display a warning and disable concurrent access to the S300. |
| • | Added value base color for Parameter tables. |
V1.4.8 (30 July 2010)
V1.4.7 (16 April 2010)
| • | Added an option to check for beta version updates. |
| • | Correct pressure display psi unit. (Pressure values shown in psi were incorrectly calculated high by approximately 1.2%. Existing calibrations may show corrected values ~1.2% lower, but the underlying pressure values are unchanged, and the calibration will run identically.) |
| • | Fixed problem which would occasionally reset ECU depending on parameter options. |
| • | Fixed problem where boost control duty would stay at 0% after gear shift. |
V1.4.5 (8 February 2010)
| • | Sensor window enhancements (alternating row colors to aid visibility, on/off parameters show as indicators). |
| • | Graph window enhancements (better time axis labeling, ensure sensor labels are always visible). |
| • | Table window enhancements (2D graph allows drag selection, 2D graph selects rows and columns with Shift and Ctrl clicks) |
| • | Fixed PSP input increasing idle speed when PSP input used for other purposes. |
| • | Parameters window now scrolls. |
| • | Changed file association to work with Windows Vista / 7 security. |
| • | Allow capital I and D when editing notes. |
| • | Fixed 'Idle Speed Moving' table not showing temperature values in Celsius. |
| • | Added support for Windows Themes. |
| • | Added option to show 4 bar tables. |
| • | Added option for closed loop using wideband lambda input. |
V1.4.4.1 (26 October 2009)
| • | Fixed 1.4.4 boost control duty cycle table not saving/loading correctly. |
V1.4.4 (15 October 2009)
| • | Fixed nitrous 3 fuel & ignition load & save behaviour. |
V1.4.3 (7 August 2009)
| • | Added maximum speed for radiator fan override. |
| • | Added boost control solenoid frequency. |
| • | Added boost control direct duty cycle lookup. |
V1.4.2 (23 June 2009)
| • | Added MAP fuel overrun cutoff table. |
| • | Fixed boost control duty pressure value conversion when reading old calibrations. |
| • | Fixed nitrous3 maximum speed edit. |
| • | Fixed access violation when closing a datalog recording. |
V1.4.1 (11 March 2009)
| • | Added datalog and error code prompts. |
| • | Added option to disable the screen saver when datalogging. |
| • | Added ignition retard to strain gauge based full throttle shift. |
| • | Added the option to force the radiator fan on at a temperature. |
| • | Added maximum speed to nitrous conditions. |
| • | Fixed AC switch increasing idle speed when AC switch used for other purposes. |
V1.4.0 (20 November 2008)
| • | Added default graph templates. |
| • | Added display templates. |
| • | Added calibration compare function. |
| • | Added Winqual certified USB drivers. |
V1.3.9 (28 August 2008)
| • | Added 5000Hz and 8000Hz warning sounds to the display. |
| • | Fixed Voltage/Lambda conversion table behaviour when using lambda units. |
V1.3.8 (1 August 2008)
V1.3.7 (17 July 2008)
| • | Added right mouse button graph zoom. |
| • | Added overrun cutoff TPS and delay settings. |
| • | Added strain gauge full throttle shift input. |
| • | Fixed service connector light not flashing when service connector switch is jumpered. |
V1.3.6 (7 May 2008)
| • | Fixed wideband lambda setting entry |
V1.3.5 (1 May 2008)
| • | Fixed gear ratios changing to 0 when selected from list |
V1.3.4 (2 March 2008)
| • | Added boost control by rpm and gear. |
| • | Added 'Adjust' to parameter tables. |
| • | Added proportional table tracing. |
V1.3.3 (17 January 2008)
| • | Fixed injector duty cycle showing over 100% |
| • | Added scroll bars to Display window. |
V1.3.2 beta (20 December 2007)
| • | Enhanced display window. |
| • | Added check for inadvertent secondary table editing. |
| • | Fixed auto-tune adjustment when using TPS based table indexing. |
| • | Added RDX and Omnipower MAP sensors. |
V1.3.1 (6 November 2007)
| • | Added sensor value cursor display to graph. |
| • | Fixed open loop operation. |
V1.3.0 (25 October 2007)
| • | SManager now prompts to save unsaved datalogs when closing. |
V1.2.9 (August 2007)
| • | Added high water temperature ignition compensation table. |
| • | Added injector voltage compensation table. |
| • | Added additional IAB output. |
V1.2.8 (July 2007)
| • | Fixed some ignition retard settings not saving. |
V1.2.7 (27 April 2007)
| • | In the display window knock voltage has been changed to knock retard. |
| • | Fixed secondary tables cutting out under some circumstances. |
| • | Improved on board datalogging when memory is full and also externally datalogging. |
V1.2.6 (27 Mar 2007)
| • | Added Windows Vista USB driver install procedure. |
V1.2.5 (23 Mar 2007)
| • | Added the option to disable the VTEC spool error check. |
| • | Application is now digitally signed by Hondata. |
V1.2.4 (7 Mar 2007)
| • | Removed advance/retard nitrous ignition selection (retard is now entered as a negative number). |
| • | Fixed nitrous outputs not switching on under some circumstances. |
V1.2.3 (18 Jan 2007)
| • | Fixed high/low boost control not working correctly on low boost. |
| • | Added 'Test USB' function. |
| • | Added a VTEC output for non-VTEC ECUs. |
| • | Added Graph default display size in Settings;General. |
| • | In the Parameters window split 'IAT Compensation' and 'ECT Compensation' into 'Fuel Compensation' and 'Ignition Compensation'. |
| • | Clarified TPS range buttons (renamed from 'Set' to 'Read') |
V1.2.2 (12 Dec 2006)
| • | Added the ability to insert & delete table rpm and load indexes. |
V1.2.1 (4 Dec 2006)
| • | Added analog input 2 (pin B6). |
| • | Added nitrous output (pin A10). |
| • | Increased speed of launch limiter. |
V1.2.0 (8 Nov 2006)
| • | Fixed documentation of analog input (incorrectly documented as B6, actually is D12) |
| • | Remove minimum ignition timing limit |
| • | Prevent starting calibrations from being overwritten. |
| • | Datalog TPS when engine is not running. |
| • | Added kph/mph unit to the datalogging stop speed. |
| • | Added minimum and maximum water temperature to the nitrous outputs. |
V1.1.9 (16 Oct 2006)
| • | Added 12 supercharged and turbocharged calibrations. |
| • | Improved copy and paste between parameter tables. |
V1.1.8 (16 Sep 2006)
| • | Added third nitrous output. |
| • | Added FANC (radiator fan output) to nitrous outputs. |
| • | Added ALTC (alternator control output) to nitrous outputs. |
| • | Added 'Set Ignition Timing' function. |
| • | Added an auxiliary analog input. |
| • | Limit first and last water and air temperature compensation table index values. |
| • | Changed the positions of Parameter window tabs so they move around less. |
| • | Added open and closed loop ECT correction. |
| • | Added TPS recalibration. |
| • | Added a base calibration for ITBs. |
| • | Fixed USB datalogging when simultaneously on-board datalogging and datalogging memory is full |
V1.1.7 (14 Aug 2006)
| • | Added invalid file check when loading. |
| • | Improved calibration save/reload. |
V1.1.6 (10 Aug 2006)
| • | Added boost controller PWM output. |
| • | Added IAT ignition compensation. |
| • | Added ECT ignition compensation. |
V1.1.5 (19 May 2006)
| • | Allow KManager and SManager to connect to ECUs simultaneously |
| • | Improved importing s200 calibrations using a 5 bar MAP |
| • | Improved data integrity when downloading from the ECU which was uploaded with an old SManager version |
V1.1.4 (4 April 2006)
| • | Improved upload to recognize when ECU has been swapped. |
V1.1.3.0 (3 Mar 2006)
| • | Added P61 base calibration |
| • | In Datalog Download enabled the 'Delete All', so that the datalog memory can be reset. |
| • | Fixed Water and Dual Boost outputs so that unused conditions are not evaluated |
V1.1.2.0 (3 Feb 2006)
| • | Added the option to invert the purge valve output |
| • | Fixed 2d & 3d graphs not showing the table selection |
| • | Added ECT and IAT correction to datalogging |
| • | Fixed invert purge setting not being saved |
V1.1.1.0
| • | Fixed nitrous2 maximum rpm not saving |
V1.1.0.0
| • | Added adjustable voltage offset for the wideband lambda conversion. |
| • | Added additional MAP sensor details |
| • | Added additional sensor overlay features |
| • | Added fuel overrun cutoff rpm |
| • | Added increase / decrease current cell |
| • | Added additional water temperature correction tables |
V1.0.9.0
| • | Fixed ECT & nitrous fuel/ignition tables not saving/reloading |
V1.0.8.0
| • | Fixed help file not always displaying |
| • | Fixed clear lambda not clearing values from tables |
V1.0.7.0
| • | Fixed wideband configuration not saving 'custom' setting. |
| • | Added Techedge to the list of widebands. |
| • | Fixed sensor display minimum/maximum not being used for graphs. |
| • | Added lambda overlay and 'Clear Lambda Highlighting' menu option. |
V1.0.6.0
| • | Fixed injectors cutting out early for non-stock MAP sensors upon overrun conditions. |
V1.0.5.0
| • | Fixed purge valve operation so that it only operates above 2000 rpm and 10% throttle to prevent starting issues with OBDII vehicles. |
V1.0.4.0
| • | Fixed erratic boost cut and rev limit |
| • | Added lambda to display window |
| • | ELD can be used as the lambda input |
V1.0.3.0
| • | Fixed duty cycle display |
| • | Corrected table values in stock calibrations |
| • | Added an option in settings to set the temperature unit for the idle, water and air temperature compensation tables. |
| • | Fixed fuel pump and purge control valve sensor values. |
| • | Fixed lambda settings incorrectly saving. |
V1.0.2.0
| • | Fixed behaviour of table selection buttons & graph selection buttons. |
| • | Fixed boost cut when MIL |
V1.0.1.0
|