|
The Hondata K-Series Programmable ECU consists of three components:
| • | KPro - a electronic board which fits inside the Honda ECU which allows the ECU to be re-programmed plus adds datalogging functions. |
| • | KManager - Windows software which interfaces with KPro. |
KPro I
| • | Allows re-programming of the factory ECU. |
| • | Datalog from the ECU to a laptop via USB. |
KPro II
| • | Sold between August 2007 and September 2011. |
| • | 16 MBit of onboard datalogging memory. |
| • | 10-110 minutes of recording without a laptop. |
KPro III
| • | Sold from September 2011 onwards. |
| • | 32 MBit of onboard datalogging memory. |
| • | 10-200 minutes of recording without a laptop. |
| • | Improved upload speed (3 times as fast as the KPro I & II) |
| • | Calibrations stored on KPro for quick access and improved download reliability. |
| • | Anti-theft features: owner information stored on KPro, internet registration with Hondata, upload can be password protected. |
Hondata, Inc.
2840 Columbia St
Torrance, CA 90503
Tel: 310-782-8278
World Wide Web Site: http://www.hondata.com
© Hondata, Inc., 2003-2011
Hondata is not affiliated with Honda Motor Co. Windows is a trademark of Microsoft Corp.
|